Kenmore Dryer F:23 Error Code
What the F:23 code means
Outlet thermistor failure, shorted circuit, on Kenmore Elite dryers (110-series Whirlpool-built platform): the control detects an electrically shorted outlet (exhaust) temperature sensor.
Likely causes
- Shorted outlet thermistor
- Pinched or damaged thermistor wiring causing a short
- Control board fault if sensor and wiring test good
How to fix it — step by step
- Unplug the dryer before any check
- Inspect the thermistor wiring for pinching or damage
- Test the thermistor resistance; it should be about 10,000 ohms at room temperature
- Replace the outlet thermistor if its resistance is out of range
Parts that commonly fix the F:23 code
- thermistor - Shop at RepairClinic
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.