Kenmore Dryer AF Error Code

What the AF code means

Restricted or low airflow on Kenmore 110-series (Whirlpool-built) Kenmore Elite dryers: the vent is crushed, kinked or clogged with lint, so air cannot move freely. The dryer may keep running while AF is shown.

Likely causes

  1. Clogged lint screen
  2. Vent crushed or kinked behind the dryer
  3. Lint blockage in the vent run
  4. Blocked outside vent hood

How to fix it — step by step

  1. Clean the lint screen thoroughly
  2. Check the vent behind the dryer is not crushed or kinked
  3. Clean lint from the whole vent run and make sure the outside hood opens
  4. Press STOP once to clear the display, then restart; AF returns until airflow is fixed

Parts that commonly fix the AF code

This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Kenmore dryer error codes

See all Kenmore dryer codes & guides →