Kenmore Dryer L2 Error Code

What the L2 code means

Low or missing line voltage on Kenmore 110-series (Whirlpool-built) Kenmore Elite dryers: the drum may turn but the heater may not turn on, so clothes do not dry.

Likely causes

  1. One of the two house breakers or fuses for the dryer is tripped or blown
  2. Loose or incorrect power cord connection
  3. Low house supply voltage

How to fix it — step by step

  1. Press and hold START to try to restart the dryer
  2. Check both house breakers or fuses for the dryer circuit and reset or replace as needed
  3. Check the dryer is plugged into a properly grounded outlet and the cord connection is tight
  4. Call an electrician if L2 returns with both breakers on

Parts that commonly fix the L2 code

This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Kenmore dryer error codes

See all Kenmore dryer codes & guides →