Kenmore Dryer 796 Series (LG-Built) gAS Error Code
What the gAS code means
Gas supply problem on Kenmore 796-series (LG-built) gas dryers: the gas supply is off or there is a gas service issue, so the dryer cannot heat properly.
Likely causes
- House gas shutoff valve closed
- Dryer gas shutoff valve closed
- Gas service interruption
How to fix it — step by step
- Check both the house gas shutoff and the dryer gas shutoff valves are fully open
- Check whether other gas appliances are working
- Do not force anything if you smell gas; leave and call your gas company
- Call a technician or your gas provider if gAS returns with both valves open
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the fault is internal - there is no documented owner fix beyond the steps above. If you're not comfortable opening the machine up, a repair shop is the next step.
Parts that commonly fix the gAS code
No specific replacement part is documented for this fault. If the checks above do not clear it, the machine likely needs to be disassembled and an internal part replaced - and since the manufacturer publishes no procedure for that, it is the point where most owners hand it to a repair shop.
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official Kenmore manual is on Kenmore's support site — you'll need your model number.
Find your model number inside the door on the frame. It's the key to the right manual pages and the right parts.