GMC Truck Sierra 1500 Rusted brake lines leaking

What this problem usually means

On 1999-2007 Sierra 1500s the steel brake lines run along the frame where road salt and moisture collect, and after many winters they rust from the outside until a line gives way under pressure. The brake pedal suddenly sinks much lower than normal or goes nearly to the floor, sometimes with brake fluid dripping near a wheel or along the frame.

Likely causes

  1. Corrosion of steel brake lines from road salt and moisture along the frame → Shop the brake lines at Amazon
  2. A rusted line bursting under braking pressure

How to fix it — step by step

  1. If the pedal feels low or soft, do not keep driving
  2. Check brake fluid level and look for drips along the frame rail
  3. Have a shop inspect every brake line along the frame on a lift → Shop the brake line set at Amazon
  4. Replace corroded sections, ideally with corrosion-resistant line, and bleed the brakes

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related GMC Truck Sierra 1500 problems

See all GMC Sierra 1500 codes & guides →