GMC Truck Sierra 1500 Hard brake pedal

What this problem usually means

On 2014-2018 Sierra 1500s, a brake pedal that gets hard to push, worst at low speed or right after startup, with longer stopping distances, usually means the engine-driven vacuum pump that powers the brake booster is wearing out. Recall 19V645000 (20V603000 for some 2018s) reprograms the brake module to add hydraulic assist, and special coverage N182202780 pays for a new pump for 10 years/150,000 miles.

Likely causes

  1. Worn engine-driven vacuum pump reducing brake booster assist → Shop the vacuum pump at Amazon
  2. Vacuum pump drive belt failure → Shop the vacuum pump belt at Amazon
  3. Vacuum hose leak between the pump and the booster
  4. Brake booster failure, less common than the pump on these trucks

How to fix it — step by step

  1. Stop driving the truck if the pedal is hard and stopping distances have grown; reduced brake assist is a safety problem
  2. Check your VIN at nhtsa.gov/recalls for 19V645000 and, on a 2018, 20V603000
  3. Ask a GMC dealer whether special coverage N182202780 still applies to your VIN, since the pump replacement may be free
  4. Have the pump output and its drive belt inspected; a failed belt can mimic a failed pump
  5. Pump replacement and the recall software update are dealer or shop work on a safety system

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related GMC Truck Sierra 1500 problems

See all GMC Sierra 1500 codes & guides →