GMC Truck Sierra 1500 Blower motor only works on high

What this problem usually means

On 2000-2006 Sierra 1500s the fan may work only on high or on one speed, or stop entirely, sometimes with a hot plastic smell from under the dash. The resistor that sets fan speed overheats and fails, and on some trucks the heat damages its wiring plug; GM sold an upgraded harness for this.

Likely causes

  1. Overheated, failed blower motor resistor
  2. Heat damage to the resistor wiring connector

How to fix it — step by step

  1. Test every fan speed and note which speeds work
  2. Inspect the blower motor resistor and its connector for melting or scorching → Shop the blower motor resistor connector at Amazon → Shop the blower motor resistor at Amazon
  3. Replace the resistor, and replace a scorched connector plug as well so the problem does not return
  4. If the blower motor itself is worn, replace it at the same time

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related GMC Truck Sierra 1500 problems

See all GMC Sierra 1500 codes & guides →