Ford SUV Bronco Won't start and stalling
What this problem usually means
RepairPal lists the most commonly reported Bronco problem as a no-start and stalling condition caused by ignition module failure. Failure is very common in the ignition module, causing intermittent stalling or a no-start condition.
Likely causes
- ignition module failure
How to fix it — step by step
- Check whether the engine cranks and whether the fault is intermittent
- Scan for stored fault codes if the check engine light has come on
- Have a shop test the ignition module when the no-start occurs → Shop the ignition module at Amazon
- Replace the ignition module if it tests faulty
- Confirm the Bronco starts reliably and does not stall at idle or in traffic
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the ignition module.
Parts that commonly fix it
- ignition module - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official Ford manual is on Ford's support site — you'll need your model number.
Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.