Ford SUV Bronco Hardtop crazing and leaking

What this problem usually means

Molded-in-color hardtops standard on 2021-2023 Broncos and most 2024s can develop spider-web crazing or bubbling in the outer skin, and panels can leak or fail to latch flush. Affected tops were replaced under Ford's program, and a recall covers 2021-2022 roof panels whose outer skin can separate.

Likely causes

  1. crazing or delamination of the molded-in-color hardtop
  2. worn or pinched hardtop panel seals

How to fix it — step by step

  1. Check by VIN whether the recall applies to your Bronco's roof panels
  2. Inspect every panel in daylight for crazing, bubbling, or delamination
  3. Remove each panel, clean the seals and sealing faces, and refit them latching in the manual's order
  4. Have a dealer inspect and replace tops covered by Ford's program or the recall
  5. Water-test the panels and confirm no drips at the joints

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Working on a specific model? The official Ford manual is on Ford's support site — you'll need your model number.

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related Ford SUV Bronco problems

See all Ford Bronco codes & guides →