Ford SUV Bronco Rear shock reservoir corrosion
What this problem usually means
Bilstein rear shocks on Badlands and Sasquatch Broncos built from September 23, 2020 to July 23, 2024 can corrode until the external reservoir detaches. Symptoms include rusty or swollen reservoir bodies, oil on the shock body, a reservoir hanging by its hose, or a bouncy rear end, and the recall remedy is free rear shock replacement on eligible trucks.
Likely causes
- corrosion of the rear shock external reservoir
- reservoir separating from the shock body
How to fix it — step by step
- Check by VIN whether the recall applies to your Bronco
- Inspect the rear shock reservoirs and mounts for rust, swelling, or oil leaks
- Stop driving off-road if a reservoir is hanging loose or leaking heavily
- Have a dealer replace the rear shocks under the recall where it applies
- Rinse road salt off the reservoirs in winter to slow corrosion
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the rear shock absorbers.
Parts that commonly fix it
- rear shock absorbers - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official Ford manual is on Ford's support site — you'll need your model number.
Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.