Ford SUV Bronco Intake valve fracture causing engine failure
What this problem usually means
A recall covering 2021-2022 Broncos with 2.7 and 3.0 Nano EcoBoost engines addresses intake valves that can break and cause engine failure. Dealers run an engine cycle test and replace the engine if needed.
Likely causes
- brittle intake valves that can fracture → Shop the intake valves at Amazon
How to fix it — step by step
- Check by VIN whether the recall applies to your Bronco before driving it hard
- Stop driving and shut off the engine if it loses power, knocks, or stalls suddenly
- Ask a dealer for proof the recall engine cycle test was completed
- Have the dealer replace the engine if the test shows it is needed
- Keep the recall paperwork with the vehicle's service records
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
This fault usually needs a technician - but this is the part they would test first.
Then the likely broken part is the intake valves.
Parts that commonly fix it
- intake valves - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official Ford manual is on Ford's support site — you'll need your model number.
Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.