Eufy Robot vacuum Common Problems
Find your problem in the list below. Each page explains the most likely causes, step-by-step checks you can do yourself, when to call a pro, and the parts that commonly resolve it. 106 problems covered.
Shop Eufy Robot vacuum parts at Amazon
All Robot vacuum codes across brands →
Not sure of the code? Tap along with it
If your Eufy Robot vacuum blinks or beeps a pattern instead of showing a code, tap the button in time with each blink or beep. A pause longer than a second and a half starts a new group - we will match the rhythm to a code.
Your rhythm: -
Finding your model number: it is on the underside label or in the app.
RoboVac 11S
All Eufy RoboVac 11S codes & guides → (8 covered)
- Flashing red LED, 1 beep — RoboVac is stuck and one wheel is not making contact with the floor (hanging in mid-air), or it is in a very large room and the bumper is…
- Flashing red LED, 2 beeps — RoboVac's bumper is stuck.
- Flashing red LED, 3 beeps — RoboVac's drop sensors are dirty, or RoboVac is stuck on the ledge of a staircase and cannot reverse.
- Flashing red LED, 4 beeps — RoboVac's power level is too low (battery / charging error).
- Solid red LED, 1 beep — RoboVac's left or right wheel is stuck.
- Solid red LED, 2 beeps — RoboVac's side brush is stuck.
- Solid red LED, 3 beeps — RoboVac's suction fan is stuck.
- Solid red LED, 4 beeps — RoboVac's rolling brush is stuck.
RoboVac 15C
All Eufy RoboVac 15C codes & guides → (8 covered)
- Flashing red LED, 1 beep — RoboVac is stuck and one wheel is not making contact with the floor (hanging in mid-air), or it is in a very large room and the bumper is…
- Flashing red LED, 2 beeps — RoboVac's bumper is stuck.
- Flashing red LED, 3 beeps — RoboVac's drop sensors are dirty, or RoboVac is stuck on the ledge of a staircase and cannot reverse.
- Flashing red LED, 4 beeps — RoboVac's power level is too low (battery / charging error).
- Solid red LED, 1 beep — RoboVac's left or right wheel is stuck.
- Solid red LED, 2 beeps — RoboVac's side brush is stuck.
- Solid red LED, 3 beeps — RoboVac's suction fan is stuck.
- Solid red LED, 4 beeps — RoboVac's rolling brush is stuck.
RoboVac 30C
All Eufy RoboVac 30C codes & guides → (8 covered)
- Flashing red LED, 1 beep — RoboVac is stuck and one wheel is not making contact with the floor (hanging in mid-air), or it is in a very large room and the bumper is…
- Flashing red LED, 2 beeps — RoboVac's bumper is stuck.
- Flashing red LED, 3 beeps — RoboVac's drop sensors are dirty, or RoboVac is stuck on the ledge of a staircase and cannot reverse.
- Flashing red LED, 4 beeps — RoboVac's power level is too low (battery / charging error).
- Solid red LED, 1 beep — RoboVac's left or right wheel is stuck.
- Solid red LED, 2 beeps — RoboVac's side brush is stuck.
- Solid red LED, 3 beeps — RoboVac's suction fan is stuck.
- Solid red LED, 4 beeps — RoboVac's rolling brush is stuck.
RoboVac G30
All Eufy RoboVac G30 codes & guides → (17 covered)
- Error 1 — Voice prompt 'Error 1: Front bumper stuck' — the front bumper is stuck.
- Error 10 — Voice prompt 'Error 10: Path Tracking Sensor needs cleaning' — the path tracking sensor is blocked by dust.
- Error 2 — Voice prompt 'Error 2: Wheel stuck' — a wheel is stuck or trapped.
- Error 21 — Voice prompt 'Error 21: Auto-Empty Station blocked by surrounding obstacles' — applies to models used with an Auto-Empty / Self-Empty…
- Error 22 — Voice prompt 'Error 22: The device is being picked up' — RoboVac has been lifted off the floor.
- Error 3 — Voice prompt 'Error 3: Side brush stuck' — the side brush may be stuck.
- Error 4 — Voice prompt 'Error 4: Rolling brush stuck' — the rolling brush is stuck.
- Error 5 — Voice prompt 'Error 5: Device trapped' — RoboVac is trapped.
- Error 6 — Voice prompt 'Error 6: Device trapped' — RoboVac may be suspended in air.
- Error 7 — Voice prompt 'Error 7: Wheel suspended' — a wheel is suspended in air.
- Error 8 — Voice prompt 'Error 8: Low battery, shutting down device' — battery is low and the system will shut down (charging error).
- Error 9 — Voice prompt 'Error 9: Magnetic Boundary Strip detected' — RoboVac is too close to a strong magnetic field or boundary strip. Eufy's chart…
- Error S1 — Voice prompt 'Error S1: Battery Error' — the battery / charging connection is not working properly (charging error).
- Error S2 — Voice prompt 'Error S2: Wheel Module Error' — a wheel module fault, beyond a simple stuck wheel.
- Error S3 — Voice prompt 'Error S3: Side Brush Error' — a side brush module fault, beyond a simple stuck brush.
- Error S4 — Voice prompt 'Error S4: Suction Fan Error' — a suction fan fault.
- Error S5 — Voice prompt 'Error S5: Rolling Brush Error' — a rolling brush fault, beyond a simple stuck brush.
RoboVac G40
All Eufy RoboVac G40 codes & guides → (17 covered)
- Error 1 — Voice prompt 'Error 1: Front bumper stuck' — the front bumper is stuck.
- Error 10 — Voice prompt 'Error 10: Path Tracking Sensor needs cleaning' — the path tracking sensor is blocked by dust.
- Error 2 — Voice prompt 'Error 2: Wheel stuck' — a wheel is stuck or trapped.
- Error 21 — Voice prompt 'Error 21: Auto-Empty Station blocked by surrounding obstacles' — applies to models used with an Auto-Empty / Self-Empty…
- Error 22 — Voice prompt 'Error 22: The device is being picked up' — RoboVac has been lifted off the floor.
- Error 3 — Voice prompt 'Error 3: Side brush stuck' — the side brush may be stuck.
- Error 4 — Voice prompt 'Error 4: Rolling brush stuck' — the rolling brush is stuck.
- Error 5 — Voice prompt 'Error 5: Device trapped' — RoboVac is trapped.
- Error 6 — Voice prompt 'Error 6: Device trapped' — RoboVac may be suspended in air.
- Error 7 — Voice prompt 'Error 7: Wheel suspended' — a wheel is suspended in air.
- Error 8 — Voice prompt 'Error 8: Low battery, shutting down device' — battery is low and the system will shut down (charging error).
- Error 9 — Voice prompt 'Error 9: Magnetic Boundary Strip detected' — RoboVac is too close to a strong magnetic field or boundary strip. Eufy's chart…
- Error S1 — Voice prompt 'Error S1: Battery Error' — the battery / charging connection is not working properly (charging error).
- Error S2 — Voice prompt 'Error S2: Wheel Module Error' — a wheel module fault, beyond a simple stuck wheel.
- Error S3 — Voice prompt 'Error S3: Side Brush Error' — a side brush module fault, beyond a simple stuck brush.
- Error S4 — Voice prompt 'Error S4: Suction Fan Error' — a suction fan fault.
- Error S5 — Voice prompt 'Error S5: Rolling Brush Error' — a rolling brush fault, beyond a simple stuck brush.
RoboVac L70
All Eufy RoboVac L70 codes & guides → (27 covered)
- Error 1 — Voice prompt 'Error 1: Front bumper stuck' — the front bumper is stuck.
- Error 11 — Voice prompt 'Error 11: Front Infrared Sensor needs cleaning' — the front infrared sensor is blocked by dust.
- Error 12 — Voice prompt 'Error 12: Right wall sensor needs cleaning' — the right wall sensor is covered in dust.
- Error 13 — Voice prompt 'Error 13: Device tilted' — RoboVac is tilted and cannot start.
- Error 14 — Voice prompt 'Error 14: Please insert dust collector and filter' — the dust collector or filter is missing or not seated.
- Error 15 — Voice prompt 'Error 15: Please clean dust collector and filter' — the dust collector is full or the filter is blocked.
- Error 16 — Voice prompt 'Error 16: Insufficient water. Add Water' — the mop water tank is empty or the water pump connection is blocked (L70 Hybrid).
- Error 17 — Voice prompt 'Error 17: Restricted area detected' — RoboVac is too close to a restricted (no-go) area.
- Error 18 — Voice prompt 'Error 18: Laser cover may be stuck' — the pressure sensor for the laser cover is stuck.
- Error 19 — Voice prompt 'Error 19: Laser sensor may be stuck' — the laser ranging sensor is covered in dust.
- Error 2 — Voice prompt 'Error 2: Wheel stuck' — a wheel is stuck or trapped.
- Error 20 — Voice prompt 'Error 20: Laser sensor may be blocked' — the laser sensor cannot read its surroundings.
- Error 21 — Voice prompt 'Error 21: Charging Base blocked by surrounding obstacles' — obstacles are blocking the charging base (charging error).
- Error 3 — Voice prompt 'Error 3: Side brush stuck' — the side brush may be stuck.
- Error 4 — Voice prompt 'Error 4: Rolling brush stuck' — the rolling brush is stuck.
- Error 5 — Voice prompt 'Error 5: Device trapped' — RoboVac is trapped.
- Error 6 — Voice prompt 'Error 6: Device trapped' — RoboVac may be suspended in air.
- Error 7 — Voice prompt 'Error 7: Wheel suspended' — a wheel is suspended in air.
- Error 8 — Voice prompt 'Error 8: Low battery, shutting down device' — battery is low and the system will shut down (charging error).
- Error 9 — Voice prompt 'Error 9: Magnetic Boundary Strip detected' — RoboVac is too close to a strong magnetic field or boundary strip.
- Error S1 — Voice prompt 'Error S1: Battery Error' — the battery / charging connection is not working properly (charging error).
- Error S2 — Voice prompt 'Error S2: Wheel Module Error' — a wheel module fault, beyond a simple stuck wheel.
- Error S3 — Voice prompt 'Error S3: Side Brush Error' — a side brush module fault, beyond a simple stuck brush.
- Error S4 — Voice prompt 'Error S4: Suction Fan Error' — a suction fan fault.
- Error S5 — Voice prompt 'Error S5: Rolling Brush Error' — a rolling brush fault, beyond a simple stuck brush.
- Error S6 — Voice prompt 'Error S6: Water Pump Error' — a mop water pump fault (L70 Hybrid).
- Error S7 — Voice prompt 'Error S7: Laser Sensor Error' — a laser (LiDAR) sensor fault.
RoboVac X8
All Eufy RoboVac X8 codes & guides → (21 covered)
- Error 1 — Voice prompt 'Error 1: Front bumper stuck' — the front bumper is stuck.
- Error 12 — Voice prompt 'Error 12: Right wall sensor needs cleaning' — the right wall sensor is covered in dust.
- Error 13 — Voice prompt 'Error 13: Device tilted' — RoboVac is tilted and cannot start.
- Error 14 — Voice prompt 'Error 14: Please insert dust collector and filter' — the dust collector or filter is missing or not seated.
- Error 17 — Voice prompt 'Error 17: Restricted area detected' — RoboVac is too close to a restricted (no-go) area.
- Error 18 — Voice prompt 'Error 18: Laser cover may be stuck' — the pressure sensor for the laser cover is stuck.
- Error 19 — Voice prompt 'Error 19: Laser sensor may be stuck' — the laser ranging sensor is covered in dust.
- Error 2 — Voice prompt 'Error 2: Wheel stuck' — a wheel is stuck or trapped.
- Error 20 — Voice prompt 'Error 20: Laser sensor may be blocked' — the laser sensor cannot read its surroundings.
- Error 21 — Voice prompt 'Error 21: Charging Base blocked by surrounding obstacles' — obstacles are blocking the charging base (charging error).
- Error 3 — Voice prompt 'Error 3: Side brush stuck' — the side brush may be stuck.
- Error 4 — Voice prompt 'Error 4: Rolling brush stuck' — the rolling brush is stuck.
- Error 5 — Voice prompt 'Error 5: Device trapped' — RoboVac is trapped.
- Error 6 — Voice prompt 'Error 6: Device trapped' — RoboVac may be suspended in air.
- Error 7 — Voice prompt 'Error 7: Wheel suspended' — a wheel is suspended in air.
- Error 8 — Voice prompt 'Error 8: Low battery, shutting down device' — battery is low and the system will shut down (charging error).
- Error 9 — Voice prompt 'Error 9: Magnetic Boundary Strip detected' — RoboVac is too close to a strong magnetic field or boundary strip.
- Error S1 — Voice prompt 'Error S1: Battery Error' — the battery / charging connection is not working properly (charging error).
- Error S2 — Voice prompt 'Error S2: Wheel Module Error' — a wheel module fault, beyond a simple stuck wheel.
- Error S3 — Voice prompt 'Error S3: Side Brush Error' — a side brush module fault, beyond a simple stuck brush.
- Error S4 — Voice prompt 'Error S4: Suction Fan Error' — a suction fan fault.