Eufy Robot vacuum RoboVac G40 Error S1
What this problem usually means
Voice prompt 'Error S1: Battery Error' — the battery / charging connection is not working properly (charging error).
Likely causes
- Charging base not powered
- Dirty charging pins on the base or the bottom of the vacuum
- RoboVac not docked so the charging pins connect properly
- Battery fault or battery temperature outside 0-40°C / 32-104°F (per owner's manual) → Shop the battery at Amazon
How to fix it — step by step
- Unplug the adapter on both ends, re-connect the adapter to the charging base, then connect the other end to a different wall outlet and confirm the power indicator on the charging base lights up
- Clean the pins on the charging base and on the bottom of the vacuum with a dry clean cloth
- Put RoboVac in front of / facing the charging base within 6 feet and press the home button so it docks on its own and the charging pins connect properly
- If the issue persists, contact Eufy customer support
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the Battery.
Parts that commonly fix it
- Battery - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the underside label or in the app. It's the key to the right manual pages and the right parts.