Eufy Robot vacuum RoboVac G40 Error S4

What this problem usually means

Voice prompt 'Error S4: Suction Fan Error' — a suction fan fault.

Likely causes

  1. Fan blades stuck in an unknown object
  2. Dust collector or filter clogged
  3. Suction fan fault

How to fix it — step by step

  1. Check whether the fan blades are stuck in an unknown object, then restart the device
  2. Clean the dust collector and filter before restarting the device
  3. If the issue persists, contact Eufy customer support

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

No specific replacement part is documented for this fault. If the checks above do not clear it, the machine likely needs to be disassembled and an internal part replaced - and since the manufacturer publishes no procedure for that, it is the point where most owners hand it to a repair shop.

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number on the underside label or in the app. It's the key to the right manual pages and the right parts.

Related Eufy Robot vacuum RoboVac G40 problems

See all Eufy RoboVac G40 codes & guides →