Eufy Robot vacuum RoboVac 30C Flashing red LED, 2 beeps
What it should sound like on your machine
then it repeats
2 beeps - then the pattern repeats. Count along with your machine and compare.
What this problem usually means
RoboVac's bumper is stuck.
Likely causes
- Debris trapped underneath the bumper
How to fix it — step by step
- Tap RoboVac's bumper several times to dislodge any debris that may be trapped underneath
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the fault is internal - there is no documented owner fix beyond the steps above. If you're not comfortable opening the machine up, a repair shop is the next step.
Parts that commonly fix it
This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the underside label or in the app. It's the key to the right manual pages and the right parts.