Eufy Robot vacuum RoboVac G40 Error 9
What this problem usually means
Voice prompt 'Error 9: Magnetic Boundary Strip detected' — RoboVac is too close to a strong magnetic field or boundary strip. Eufy's chart notes this prompt is only for G30 Edge/Verge models with boundary strips.
Likely causes
- Device too close to a magnetic boundary strip or strong magnetic field
How to fix it — step by step
- Move the device to a different area and try again
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the fault is internal - there is no documented owner fix beyond the steps above. If you're not comfortable opening the machine up, a repair shop is the next step.
Parts that commonly fix it
This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the underside label or in the app. It's the key to the right manual pages and the right parts.