Ecovacs Robot vacuum Deebot X2 Unable to create furniture map on App
What this problem usually means
The app cannot build the furniture map after cleaning.
Likely causes
- DEEBOT does not start cleaning from the Station
- Moving DEEBOT during cleaning might cause the map to be lost
- Auto cleaning is not complete
How to fix it — step by step
- DEEBOT must start cleaning from the Station
- Do not move DEEBOT as far as possible during cleaning
- Make sure DEEBOT automatically returns to the Station after cleaning
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the fault is internal - there is no documented owner fix beyond the steps above. If you're not comfortable opening the machine up, a repair shop is the next step.
Parts that commonly fix it
This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the underside label or in the app. It's the key to the right manual pages and the right parts.
Related Ecovacs Robot vacuum Deebot X2 problems
- Video Manager cannot open or has no screen
- Voice prompt: the Cleaning Sink is full
- After returning to the Station, DEEBOT does not empty the Dust Bin
- AIVI Camera cannot recognize objects
- DEEBOT does not respond to the Station instruction
- DEEBOT gets stuck while working and stops
- DEEBOT is not able to connect to ECOVACS HOME App
- DEEBOT is unable to charge
- DEEBOT returns to the Station before it has finished cleaning
- DEEBOT Side Brush drops out of place during use
- Delay in remote control
- Disordered cleaning route, deviation from the cleaning route, repeated cleaning, or missing of small areas