Ecovacs Robot vacuum Deebot T20 Unable to create home map on App
What this problem usually means
The app cannot create the home map.
Likely causes
- Moving DEEBOT during cleaning might cause the map to be lost
- Auto cleaning is not complete
- DEEBOT does not start cleaning from the Station
How to fix it — step by step
- Do not move DEEBOT as far as possible during cleaning
- Make sure DEEBOT automatically returns to the Station after cleaning
- DEEBOT must start cleaning from the Station
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the fault is internal - there is no documented owner fix beyond the steps above. If you're not comfortable opening the machine up, a repair shop is the next step.
Parts that commonly fix it
This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the underside label or in the app. It's the key to the right manual pages and the right parts.
Related Ecovacs Robot vacuum Deebot T20 problems
- Voice prompt: the Cleaning Sink is full
- Ash leakage occurs during working (dust leakage)
- DEEBOT does not respond to the Station instruction
- DEEBOT gets stuck while working and stops
- DEEBOT is not able to connect to ECOVACS HOME App
- DEEBOT is not charging
- DEEBOT returns to the Station before it has finished cleaning
- Driving wheels are blocked
- During cleaning, DEEBOT appears in route disorder, running bias, repeated cleaning, small area leakage
- Fail to enable Child Lock
- Mopping Pad Plates cannot rotate
- No signal found. Unable to return to the Station