Ecovacs Deebot T20 Common Problems
Find your problem in the list below. Each page explains the most likely causes, step-by-step checks you can do yourself, when to call a pro, and the parts that commonly resolve it. 15 problems covered.
Shop Ecovacs Deebot T20 parts at Amazon
- Ash leakage occurs during working (dust leakage) — Dust leaks while the robot or station is working.
- DEEBOT does not respond to the Station instruction — The robot ignores commands from the OMNI Station.
- DEEBOT gets stuck while working and stops — The robot becomes tangled or trapped and stops cleaning.
- DEEBOT is not able to connect to ECOVACS HOME App — App setup fails and the robot cannot be paired with the ECOVACS HOME App.
- DEEBOT is not charging — The robot is at the OMNI Station but not charging.
- DEEBOT returns to the Station before it has finished cleaning — The robot goes back to the station before the job is done.
- Driving wheels are blocked — One or both driving wheels cannot turn.
- During cleaning, DEEBOT appears in route disorder, running bias, repeated cleaning, small area leakage — The cleaning route looks disordered, the robot drifts, repeats areas or misses small areas.
- Fail to enable Child Lock — Child Lock cannot be switched on.
- Mopping Pad Plates cannot rotate — The mopping pad plates will not spin.
- No signal found. Unable to return to the Station — The robot cannot find the station signal and cannot return to charge.
- The inner side of Dust Collection Cabin is dirty — Fine dust coats the inside of the OMNI Station's dust collection cabin.
- The map is lost — The saved home map disappears from the app.
- Unable to create home map on App — The app cannot create the home map.
- Voice prompt: the Cleaning Sink is full — When the water in the Cleaning Sink is full and cannot be drained out, the voice reports that the Cleaning Sink is full.