Ecovacs Robot vacuum Deebot T20 During cleaning, DEEBOT appears in route disorder, running bias, repeated cleaning, small area leakage
What this problem usually means
The cleaning route looks disordered, the robot drifts, repeats areas or misses small areas.
Likely causes
- Objects such as wires and slippers placed on the ground block DEEBOT
- Driving Wheels slip when DEEBOT climbs steps, thresholds and door bars, affecting its judgment of the house environment
- The TrueMapping Distance Sensor is dirty or blocked by foreign matters
How to fix it — step by step
- Tidy up scattered objects before cleaning; if an area is missed DEEBOT will correct it by itself, so do not interfere by moving it or blocking the route
- Close the door of that area and clean it separately; DEEBOT will return to the starting location afterwards
- Wipe the TrueMapping Distance Sensor with a clean soft cloth or remove foreign matters
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the fault is internal - there is no documented owner fix beyond the steps above. If you're not comfortable opening the machine up, a repair shop is the next step.
Parts that commonly fix it
This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the underside label or in the app. It's the key to the right manual pages and the right parts.
Related Ecovacs Robot vacuum Deebot T20 problems
- Fail to enable Child Lock
- Mopping Pad Plates cannot rotate
- No signal found. Unable to return to the Station
- The inner side of Dust Collection Cabin is dirty
- The map is lost
- Unable to create home map on App
- Voice prompt: the Cleaning Sink is full
- Ash leakage occurs during working (dust leakage)
- DEEBOT does not respond to the Station instruction
- DEEBOT gets stuck while working and stops
- DEEBOT is not able to connect to ECOVACS HOME App
- DEEBOT is not charging