Dreame Robot vacuum Dreame X30 Ultra The station cannot automatically empty the dust box
What this problem usually means
The base station does not auto-empty the robot's dust box after docking.
Likely causes
- The dust bag in the dust tank is full
- An obstruction at the auto-empty vents of the robot, the base station, or the dust box
How to fix it — step by step
- Check whether the dust bag in the dust tank is full and replace it if it is → Shop the dust bag at Amazon
- If the dust bag is not full, check for any obstruction at the auto-empty vents of the robot, the base station, or the dust box, and clean the blocked part in time
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the Dust bag.
Parts that commonly fix it
- Dust bag - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the underside label or in the app. It's the key to the right manual pages and the right parts.
Related Dreame Robot vacuum Dreame X30 Ultra problems
- The water level in the washboard is abnormal
- The charging speed is slow
- The mop pad holder is raised abnormally
- The noise increases while the robot is operating
- The robot cannot find and return to the base station
- The robot fails to connect to Wi-Fi
- The robot gets stuck in front of the base station and cannot return to it
- The robot misses the rooms to be cleaned
- The robot moves without following the set route
- The robot will not charge
- The robot will not resume cleaning after charging
- The robot will not turn off