Dreame Robot vacuum Dreame X30 Ultra The robot will not turn off
What this problem usually means
The robot stays on when the power button is used to shut it down.
Likely causes
- The robot is charging (it cannot be turned off while charging)
How to fix it — step by step
- Move the robot from the base station, then press and hold the button for 3 seconds to turn it off
- If that does not work, press and hold the button for 10 seconds to forcibly turn off the robot
- If the problem persists, contact after-sales service
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the fault is internal - there is no documented owner fix beyond the steps above. If you're not comfortable opening the machine up, a repair shop is the next step.
Parts that commonly fix it
This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the underside label or in the app. It's the key to the right manual pages and the right parts.
Related Dreame Robot vacuum Dreame X30 Ultra problems
- The robot will not turn on
- The station cannot automatically empty the dust box
- The water level in the washboard is abnormal
- The charging speed is slow
- The mop pad holder is raised abnormally
- The noise increases while the robot is operating
- The robot cannot find and return to the base station
- The robot fails to connect to Wi-Fi
- The robot gets stuck in front of the base station and cannot return to it
- The robot misses the rooms to be cleaned
- The robot moves without following the set route
- The robot will not charge