Dreame Robot vacuum Dreame X30 Ultra The robot will not charge

What this problem usually means

The robot is docked but does not charge.

Likely causes

  1. Base station is not connected to power
  2. Poor contact between the charging contacts on the base station and the robot
  3. A foreign object at the connector of the robot

How to fix it — step by step

  1. Make sure both ends of the base station power cord are correctly plugged in
  2. Clean the charging contacts on the base station and the robot
  3. Check for any foreign object at the connector of the robot and remove it if there is one

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number on the underside label or in the app. It's the key to the right manual pages and the right parts.

Related Dreame Robot vacuum Dreame X30 Ultra problems

See all Dreame Dreame X30 Ultra codes & guides →