Dreame Robot vacuum Dreame X30 Ultra The robot misses the rooms to be cleaned

What this problem usually means

Rooms that should be cleaned are skipped.

Likely causes

  1. Doors of the rooms to be cleaned are closed
  2. A threshold higher than about 2 cm at the door (the robot cannot climb over high thresholds or steps)
  3. The place in front of the room is wet and slippery, causing the robot to slip and work abnormally

How to fix it — step by step

  1. Make sure the doors of the rooms to be cleaned are open
  2. Check for a threshold higher than about 2 cm at the door of the room
  3. Dry the floor in front of the room before using the robot

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number on the underside label or in the app. It's the key to the right manual pages and the right parts.

Related Dreame Robot vacuum Dreame X30 Ultra problems

See all Dreame Dreame X30 Ultra codes & guides →