York Furnace Slow green flash

What this problem usually means

Normal operation with no call for heat on York furnaces with the red/green/amber LED control (including PT9 series). This is a standby status, not a fault.

Likely causes

  1. thermostat satisfied or set to Off
  2. no heat call present

How to fix it — step by step

  1. Check the thermostat is set to Heat and above room temperature if you want heat
  2. Check thermostat batteries if fitted
  3. No repair is needed if the furnace heats when called

Parts that commonly fix it

This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related York furnace problems

See all York furnace codes & guides →