York Furnace 4 amber flashes

What this problem usually means

The control board is receiving a Y (cooling) signal from the thermostat without a G (fan) signal on York furnaces with the red/green/amber LED control, indicating improper thermostat wiring.

Likely causes

  1. thermostat wiring error
  2. missing G wire connection

How to fix it — step by step

  1. Check the thermostat is set to Heat, not Cool, if you are calling for heat
  2. Note the pattern for the technician
  3. Do not rewire the thermostat unless you are confident and power is off
  4. Call a technician if the wiring needs correction

Parts that commonly fix it

This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related York furnace problems

See all York furnace codes & guides →