York Furnace Steady on red
What this problem usually means
Control failure on York furnaces with the red/green/amber LED control. If the failure is internal to the control, the light stays on continuously and the manual says the entire control should be replaced.
Likely causes
- failed control board
- internal control fault
How to fix it — step by step
- Turn power off at the furnace switch for 30 seconds, then back on
- Try one heat call and note whether the LED stays steady on
- Do not keep cycling power if it stays on
- Call a licensed HVAC technician — the control is not field repairable
Parts that commonly fix it
- control board - Shop at RepairClinic
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.