York Furnace 11 red flashes
What this problem usually means
A primary or auxiliary limit switch opened and remained open for more than five minutes on York furnaces with the red/green/amber LED control. The manual says this is usually caused by a failed blower motor or blower wheel.
Likely causes
- failed blower motor
- failed blower wheel
- severe airflow restriction
How to fix it — step by step
- Turn the thermostat down and let the furnace cool
- Replace the air filter if it is dirty or clogged
- Open all supply registers and make sure return vents are not blocked by furniture
- Restore the heat call and watch whether the code returns
- If the limit code repeats, stop and call a licensed HVAC technician
Parts that commonly fix it
- blower motor - Shop at RepairClinic
- limit switch - Shop at RepairClinic
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.