Trane Furnace E3.4 Error Code

What the E3.4 code means

On two-stage Trane S-series furnaces with a seven-segment display (S9X2, S8X2), code E3.4 means the second-stage pressure switch is open — second-stage draft was not proved. It does not apply to single-stage S9X1/S9B1/S8X1 models.

Likely causes

  1. Blocked vent or intake at high fire
  2. Clogged condensate drain
  3. Weak inducer at second stage
  4. Failed second-stage pressure switch

How to fix it — step by step

  1. Clear the outdoor vent and intake terminations
  2. Check the condensate drain for clogs or freezing
  3. Reset power once and observe whether the fault occurs only on high heat demand
  4. Call a technician to test the second-stage pressure switch and inducer

Parts that commonly fix the E3.4 code

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Trane furnace error codes

See all Trane furnace codes & guides →