Trane Furnace E3.1 Error Code

What the E3.1 code means

On Trane S-series furnaces with a seven-segment display (S9X1, S9X2, S9B1 and S8X1, S8X2), code E3.1 means the first-stage pressure switch is shorted (closed when it should be open, before the inducer runs).

Likely causes

  1. Pressure switch stuck closed
  2. Water or debris in the pressure switch or hose
  3. Shorted pressure switch wiring

How to fix it — step by step

  1. Check outdoor vent terminations for blockages
  2. Check the condensate drain for clogs
  3. Reset power once and note if the code returns before the inducer starts
  4. Call a technician to test or replace the pressure switch

Parts that commonly fix the E3.1 code

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Trane furnace error codes

See all Trane furnace codes & guides →