Subaru SUV Outback Oxygen sensor failure
What this problem usually means
The front oxygen (air/fuel ratio) sensor in Outbacks produced from 2000 to 2015 suffered from cracking and failing, and Subaru fixed it under a government-mandated recall. A failed sensor can cause a rough idle, slower acceleration, the engine running hot, a gasoline smell at idle and starting problems.
Likely causes
- cracked front oxygen sensor element
How to fix it — step by step
- Check by VIN whether the front oxygen sensor recall applies and was completed → Shop the oxygen sensor at Amazon
- Scan for air/fuel ratio sensor fault codes if the check engine light is on
- Note rough idle, slow acceleration or a fuel smell at idle that arrived with the light
- Replace the front oxygen sensor - free at a dealer if the recall is open on the car
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the oxygen sensor.
Parts that commonly fix it
- oxygen sensor - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official Subaru manual is on Subaru's support site — you'll need your model number.
Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.