Subaru SUV Outback Oil leak from front engine seals

What this problem usually means

Front engine oil leaks can develop on the Outback from the camshaft seal and the crankshaft front seal. If one or more seals need replacement, it is often wise to replace the timing belt at the same time, since these seals are commonly inspected and replaced as part of a timing belt service; the problem covers 8 model years at an average of about 131,000 miles.

Likely causes

  1. leaking camshaft front seal
  2. leaking crankshaft front seal

How to fix it — step by step

  1. Look for oil wetting the front of the engine and drips under the front of the car
  2. Check the oil level and monitor how quickly it falls
  3. Have a shop clean the front of the engine and confirm which seal is leaking
  4. Replace the leaking camshaft or crankshaft front seals, and the timing belt and related parts while access is open → Shop the crankshaft front seal at Amazon → Shop the camshaft seal at Amazon

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Working on a specific model? The official Subaru manual is on Subaru's support site — you'll need your model number.

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related Subaru SUV Outback problems

See all Subaru Outback codes & guides →