Subaru SUV Outback CVT transmission failure
What this problem usually means
Subaru went through a period of poor CVT transmissions that fail or break prematurely. The 2010 to 2014 Outback is worst affected, suffering slippage, shuddering and sometimes outright failure; Subaru extended the CVT warranty to 10 years or 100,000 miles on 2010 to 2018 models, and a failed unit is expensive outside that coverage.
Likely causes
- internal cvt belt and pulley wear
- cvt failure on 2010-2014 models in particular
How to fix it — step by step
- Note slipping, shuddering or a loss of drive and scan for transmission fault codes
- Check whether the car is still inside Subaru's extended 10-year/100,000-mile CVT warranty
- Have the CVT fluid condition checked - metal debris in the fluid points to internal failure → Shop the cvt fluid at Amazon
- Have a shop confirm the failure and repair or replace the CVT; do not keep driving a slipping unit
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
This fault usually needs a technician - but this is the part they would test first.
Then the likely broken part is the cvt fluid.
Also tied to this fault: cvt transmission - Shop at Amazon
Parts that commonly fix it
- cvt fluid - Shop at Amazon
- cvt transmission - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official Subaru manual is on Subaru's support site — you'll need your model number.
Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.