Subaru Hatchback Crosstrek Wiring harness short circuit
What this problem usually means
Some Crosstreks, particularly 2019 models, have an instrument panel wiring harness with insufficient clearance that can rub on the steering beam bracket and damage wire insulation. The resulting short circuit can in severe cases cause a loss of motive power while driving.
Likely causes
- wiring harness rubbing on steering beam bracket
- damaged wire insulation
How to fix it — step by step
- Stop driving and park safely if the engine loses power or multiple warning lights appear
- Note any EyeSight error messages or electrical faults and when they occur
- Check by VIN whether the wiring harness recall applies to your Crosstrek
- Have a dealer inspect and repair or replace the damaged instrument panel wiring harness → Shop the instrument panel wiring harness at Amazon
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
This fault usually needs a technician - but this is the part they would test first.
Then the likely broken part is the instrument panel wiring harness.
Parts that commonly fix it
- instrument panel wiring harness - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official Subaru manual is on Subaru's support site — you'll need your model number.
Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.