Subaru Hatchback Crosstrek CVT shuddering and hesitation

What this problem usually means

The Lineartronic CVT in the Crosstrek draws documented driveability complaints, including jerky or hesitant shifting, erratic behavior in stop-and-go traffic, and shuddering during acceleration, with the 2018 model year drawing the most complaints. Subaru issued CVT warranty extensions and a recall for 2013 to 2017 models over contaminated transmission fluid causing premature wear.

Likely causes

  1. contaminated cvt fluid
  2. cvt wear

How to fix it — step by step

  1. Note whether the shudder or hesitation happens in stop-and-go traffic or on acceleration
  2. Check by VIN whether the CVT recall or warranty extension applies to your Crosstrek
  3. Have a shop check the CVT fluid level and condition for dark fluid or a burnt smell → Shop the cvt fluid at Amazon
  4. Have the transmission control module software updated and the CVT serviced or repaired as directed

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Working on a specific model? The official Subaru manual is on Subaru's support site — you'll need your model number.

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related Subaru Hatchback Crosstrek problems

See all Subaru Crosstrek codes & guides →