Subaru Hatchback Crosstrek PCV valve failure

What this problem usually means

Second-generation Crosstreks built after 2018 were fitted with PCV valves that can fail, letting motor oil enter the combustion chamber. In worse cases parts of the valve can fall into the engine and damage internals, and Subaru issued a recall offering free valve replacement and engine coverage for severe damage.

Likely causes

  1. defective pcv valve

How to fix it — step by step

  1. Watch for rising oil consumption or blue exhaust smoke and check the oil level
  2. Check by VIN whether the PCV valve recall applies to your Crosstrek → Shop the pcv valve at Amazon
  3. Have a dealer replace the PCV valve under the recall
  4. Have the engine inspected for internal damage if the valve has broken apart

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Working on a specific model? The official Subaru manual is on Subaru's support site — you'll need your model number.

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related Subaru Hatchback Crosstrek problems

See all Subaru Crosstrek codes & guides →