Shark Robot vacuum IQ / EZ Series CLEAN (RED) + DOCK (BLUE) + ! (RED) flashing

What this problem usually means

Error number 21 in Shark IQ and EZ manuals: the robot has encountered an error while booting. Shown by CLEAN red, DOCK blue and ! red flashing. AI Robot models show the same Error 21 with DOCK white instead of blue — see the AI Robot Series entry.

Likely causes

  1. Temporary start-up / boot fault
  2. Robot interrupted or moved while starting up

How to fix it — step by step

  1. Turn the power switch off
  2. Wait a few seconds, then turn the power back on
  3. Place the robot on a level surface and let it finish starting up
  4. Start cleaning again, and contact Shark support if it fails to boot repeatedly

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Working on a specific model? The official Shark manual is on Shark's support site — you'll need your model number.

Find your model number on the underside label or in the app. It's the key to the right manual pages and the right parts.

Related Shark Robot vacuum IQ / EZ Series problems

See all Shark IQ / EZ Series codes & guides →