Shark Robot vacuum IQ / EZ Series CLEAN (BLUE) + DOCK (RED) flashing
What this problem usually means
Error number 23 in Shark IQ and EZ manuals: check the base / charging placement. The manual's solution is to make sure the base indicator light turns blue to confirm the robot is placed on the base correctly. AI Robot models show the same Error 23 with CLEAN white instead of blue — see the AI Robot Series entry.
Likely causes
- Robot not seated correctly on the base / dock
- Base placed unevenly or against clutter so the robot cannot align
- Charging contacts not meeting
How to fix it — step by step
- Check the base is on a level surface with clear space around it
- Pick the robot up and place it on the base squarely
- Make sure the base indicator light turns blue to confirm correct placement
- Leave the robot on the base to charge, then restart cleaning
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the fault is internal - there is no documented owner fix beyond the steps above. If you're not comfortable opening the machine up, a repair shop is the next step.
Parts that commonly fix it
This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official Shark manual is on Shark's support site — you'll need your model number.
Find your model number on the underside label or in the app. It's the key to the right manual pages and the right parts.