Samsung Washer 4C2 Error Code
What the 4C2 code means
The water from the cold supply is extremely hot, usually because the hot and cold hoses are swapped. This is the newer form of the 4E2 hot/cold error; Samsung says service is not needed for this code.
Likely causes
- Hot and cold supply hoses swapped at the inlets
- Cold inlet connected to a hot supply
- Incoming water too hot for the selected delicate or wool cycle
How to fix it — step by step
- Turn off both supply taps
- Reconnect the hoses so cold (usually blue) goes to the cold inlet and hot (usually red) to the hot inlet
- Run a rinse cycle to confirm the code clears
- If the hoses were already correct, check that the cold tap is not supplying hot water
Parts that commonly fix the 4C2 code
This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.