Samsung Washer 5C Error Code
What the 5C code means
Water is not draining from the washer, or is draining too slowly. This is the newer display form of the older 5E and nd no-drain codes.
Likely causes
- Clogged debris / pump filter
- Kinked, clogged or frozen drain hose
- Drain hose installed too low, too high or pushed too far into the standpipe
- Object lodged in the drain pump
- Failed drain pump
How to fix it — step by step
- Unplug the washer and, on front-load models, drain via the emergency hose and clean the debris filter
- Check the drain hose for kinks and blockages and straighten it to the drain
- Make sure the drain hose is at the correct height and not sealed airtight in the standpipe
- Remove any coins, lint or small items found in the filter housing
- Plug back in and run a spin cycle to drain remaining water
Parts that commonly fix the 5C code
- drain pump - Shop at RepairClinic
- drain hose - Shop at RepairClinic
- debris filter - Shop at RepairClinic
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.