Samsung Washer 4E1 Error Code
What the 4E1 code means
Water temperature issue: incoming water is too hot, or the hose is connected to a hot supply instead of cold. Samsung groups 4E1 with 4C2, 4E2 and 4Ed.
Likely causes
- Hot and cold supply hoses swapped at the inlets
- Cold inlet connected to a hot supply
- Incoming water too hot for the selected delicate or wool cycle
How to fix it — step by step
- Turn off both supply taps
- Reconnect the hoses so cold (usually blue) goes to the cold inlet and hot (usually red) to the hot inlet
- Run a rinse cycle to confirm the code clears
- If the hoses were already correct, check that the cold tap is not supplying hot water
Parts that commonly fix the 4E1 code
This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.