Samsung Washer AC Error Code
What the AC code means
Communication error: check communications between the main and sub PBAs. Samsung groups AC with AE signal communication errors.
Likely causes
- Communication failure between the main and sub control boards (PBAs) → Shop the main control board at RepairClinic
- Loose or damaged wiring harness between boards → Shop the wiring harness at RepairClinic
- Failed sub or main control board → Shop the sub control board at RepairClinic
How to fix it — step by step
- Turn the machine off and restart the cycle
- Unplug for 2-3 minutes, restore power and retry
- If the code remains, stop and request service - board communication is not a DIY repair
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
This fault usually needs a technician - but this is the part they would test first.
Then the likely broken part is the main control board.
Shop the main control board at RepairClinic or Amazon
Also tied to this fault: sub control board - Shop at RepairClinic or Amazon; wiring harness - Shop at RepairClinic or Amazon
Parts that commonly fix the AC code
- main control board - Shop at RepairClinic or Amazon
- sub control board - Shop at RepairClinic or Amazon
- wiring harness - Shop at RepairClinic or Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official Samsung manual is on Samsung's support site — you'll need your model number.
Find your model number inside the door rim or on the back panel. It's the key to the right manual pages and the right parts.