Samsung Oven Current Models (C-Codes) tESt Error Code
What the tESt code means
Demo mode: the range is in Demo mode (also shown as tE5t), so the oven and cooktop will not heat, although gas cooktops will still ignite. This is not a fault.
Likely causes
- Demo / showroom mode left on
- Demo mode enabled accidentally
How to fix it — step by step
- Follow the steps in your model's user manual to turn off Demo mode, as the button sequence varies by model
- Confirm the oven heats normally afterwards
- No service is needed for tESt alone
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the fault is internal - there is no documented owner fix beyond the steps above. If you're not comfortable opening the machine up, a repair shop is the next step.
Parts that commonly fix the tESt code
This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official Samsung manual is on Samsung's support site — you'll need your model number.
Find your model number on the frame inside the oven door or behind the storage drawer. It's the key to the right manual pages and the right parts.