Samsung Oven Current Models (C-Codes) C-30 Error Code
What the C-30 code means
Main PCB sensor fault: the main PCB sensor is open when the oven is operating, or there is a short in the main PCB sensor.
Likely causes
- Main PCB sensor open
- Main PCB sensor shorted / failed NTC on the board
- Board wiring fault
How to fix it — step by step
- Press OFF and restart the oven
- If the problem persists, disconnect all power to the range for at least 30 seconds and reconnect
- If it returns, call for service; service data says the main PCB is replaced for this fault
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the main control board.
Parts that commonly fix the C-30 code
- main control board - Shop at RepairClinic or Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official Samsung manual is on Samsung's support site — you'll need your model number.
Find your model number on the frame inside the oven door or behind the storage drawer. It's the key to the right manual pages and the right parts.