Samsung Oven Current Models (C-Codes) C-22 Error Code
What the C-22 code means
Sub PCB sensor malfunction: the sub PCB sensor is open when the oven is operating, or there is a short in the sub PCB sensor. Samsung groups it with C-20 and C-21 as sensor malfunctions.
Likely causes
- Sub PCB sensor open
- Sub PCB sensor shorted
- Wiring fault to the sub PCB
How to fix it — step by step
- Turn off the oven and restart it
- If the problem continues, disconnect all power for at least 30 seconds and reconnect
- If it returns, call for service
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the main control board.
Parts that commonly fix the C-22 code
- main control board - Shop at RepairClinic or Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official Samsung manual is on Samsung's support site — you'll need your model number.
Find your model number on the frame inside the oven door or behind the storage drawer. It's the key to the right manual pages and the right parts.