Samsung Oven Current Models (C-Codes) C-24 Error Code

What the C-24 code means

The temperature sensor has detected the oven temperature rising faster than the normal rate, generally caused by the vent on the back of the cooktop being blocked or partially blocked.

Likely causes

  1. Cooktop vent blocked by a pan or cover
  2. Partially blocked vent restricting airflow
  3. Oven overheating for another reason if the vent is clear

How to fix it — step by step

  1. Remove anything covering the vent on the back of the cooktop
  2. While cooking, open and close the door a few times for about 3 seconds at a time to release warm air
  3. Or turn off the oven and leave the door open for 1 minute to let it cool
  4. If it recurs with a clear vent, request service

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix the C-24 code

This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Working on a specific model? The official Samsung manual is on Samsung's support site — you'll need your model number.

Find your model number on the frame inside the oven door or behind the storage drawer. It's the key to the right manual pages and the right parts.

Related Samsung Oven Current Models (C-Codes) error codes

See all Samsung Current Models (C-Codes) codes & guides →