Samsung Oven Current Models (C-Codes) C-20 Error Code
What the C-20 code means
Oven sensor malfunction: the oven sensor is open when the oven is operating, or there is a short in the oven sensor. Samsung groups C-20, C-21 and C-22 as sensor malfunctions.
Likely causes
- Oven temperature sensor open (over about 2950 ohms in service data) → Shop the oven temperature sensor at RepairClinic
- Oven temperature sensor shorted (under about 930 ohms)
- Damaged sensor wiring harness
How to fix it — step by step
- Turn off the oven and restart it
- If the problem continues, disconnect all power for at least 30 seconds and reconnect
- Do not keep cooking on a faulty sensor; temperatures will be wrong
- If it returns, call for service to test and replace the sensor
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the oven temperature sensor.
Parts that commonly fix the C-20 code
- oven temperature sensor - Shop at RepairClinic or Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official Samsung manual is on Samsung's support site — you'll need your model number.
Find your model number on the frame inside the oven door or behind the storage drawer. It's the key to the right manual pages and the right parts.