RAM Truck 3500 TIPM failure causing no-start and electrical faults
What this problem usually means
On older Ram 3500 trucks, most commonly 3rd and early 4th generation models, the Totally Integrated Power Module (TIPM) is a known failure point for hard-to-diagnose electrical problems. A failing TIPM can stop the fuel pump turning on, make windows or wipers operate on their own, or leave the truck unable to start at all.
Likely causes
- failing totally integrated power module → Shop the totally integrated power module at Amazon
How to fix it — step by step
- Note which electrical items act on their own and whether the failure coincides with a no-start
- Check the battery and its connections first so a simple power fault is not mistaken for a TIPM failure
- Have a shop test power feeds from the TIPM to the fuel pump and affected circuits
- Have the TIPM replaced and programmed if it is confirmed as the failure
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the totally integrated power module.
Parts that commonly fix it
- totally integrated power module - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.