RAM Truck 3500 Aisin AS69RC harsh low-speed shifts (High Output 3500)

What this problem usually means

The Aisin AS69RC six-speed fitted to Ram 3500 trucks with the High Output 6.7L Cummins — a 3500-only powertrain — has a specific failure mode in which the K2 hub and valve body wear prematurely, giving inconsistent clutch engagement. It shows up as harsh or jerky shifts at low speed, particularly when transitioning from reverse to drive under load, and the Aisin needs fluid changes at 30,000-mile intervals.

Likely causes

  1. premature k2 hub wear in the aisin transmission
  2. aisin valve body wear

How to fix it — step by step

  1. Note whether the harsh shifts happen mainly at low speed or on reverse-to-drive changes under load
  2. Check the transmission service history — the Aisin requires fluid changes every 30,000 miles
  3. Have a transmission shop test the valve body and clutch engagement before condemning the whole unit → Shop the transmission valve body at Amazon
  4. Have the worn valve body or K2 hub repaired or replaced by a transmission shop → Shop the k2 hub at Amazon

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related RAM Truck 3500 problems

See all RAM 3500 codes & guides →