Payne Furnace 31.4 Error Code

What the 31.4 code means

Loss of pressure before the blower comes on, on the Payne PG80MSU (3-digit display model with pressure transducer). The LED flashes major code 31 while the display reads 31.4: vent pressure was lost before the heating blower started.

Likely causes

  1. Restricted vent system
  2. Disconnected or obstructed pressure tubing
  3. Defective inducer motor
  4. Defective pressure transducer
  5. Low inducer voltage

How to fix it — step by step

  1. Check the outdoor intake and exhaust pipes for snow, ice, leaves or a nest and clear anything blocking them
  2. Replace a dirty air filter
  3. Note the code for the technician
  4. If the code returns, call a technician - inducer and transducer testing is professional work

Parts that commonly fix the 31.4 code

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Payne furnace error codes

See all Payne furnace codes & guides →